Аппликатор клея-расплава серии YT-QB202 разработан для плавления любых форм и форм клея-расплава. Его можно использовать в диапазоне от 500 до 12 000 CPS и подходит для ручных и полуавтоматических приложений. Внутренняя часть нагнетается пневматическим поршнем.

The machine can be divided into two main parts, the electrical control part and the mechanical part. The mechanical part also includes a hydraulic system and a pneumatic power part. The heat preservation method is to cover the bottom of the plastic storage barrel and the place around it with the double-layer glass fiber, which can reduce the heat absorbed by the mechanical surface and prevent the user from being burnt.

The solid hot melt adhesive is rapidly melted into a liquid in a specially constructed plastic storage tank, and flows to the bottom of the plastic bucket, which is gathered around the double-action piston pump (Dual-Action Piston Pump) at the bottom of the plastic bucket, and the cylinder on the piston pump When activated, the molten glue is sucked into the pump, and the glue is also extruded through the heating plate to the rubber sheet (Manifold), and then flows through the filter group device, and then flows out of the rubber board through the insulation tube or guide. The hose guides the nozzle assembly or the hot melt glue gun, and the glue sprayed by these devices is available.